Palfinger PK15002 on 2006 Mitsubishi Fuso Fighter

A well set up 4 x 2 line servicing truck. The Palfinger PK15002 crane has a maximum lift at 2m of 5,750kg and extends to 12.4 meters hydraulically where it will lift 760kg. Slide out the manual extension and 14.6m can be reached.

SKU: 1011 Categories: ,

Overview

A well set up 4 x 2 line servicing truck. This sound, heavy duty truck runs a 207kw/275hp motor, 9sp gearbox, has full air braking including a full air 'maxi' handbrake, and a strong 6.3 tonne front axle. The all-steel deck is 4.2 meters long and x 2.35 meters wide and is fitted with neat alloy drop sides. There are numerous tool/storage boxes both above and below the deck including one with drawers.

The 2005 rear mounted Palfinger PK15002 crane has a maximum lift at 2m of 5,750kg and extends to 12.4 meters hydraulically where it will lift 760kg. By sliding out the manual extension a maximum of 14.6 meters can be reached. The crane is also fitted with auxiliary hydraulics which in this case run an auger drill and a 500mm drill bit. These, along with the extension hoses, are all contained on the headboard.

On the left hand side is a roller rack for containing 3 ladders, on the right is a pole rack, at the rear a vice, and at the front is an alloy water tank for washing up.

A truck full of features benefitting the lines services industry and well suited to the rigours of crane work.

PLEASE NOTE: Information on this page was assumed correct at time of publishing however is subject to change or be updated at any time without notice. Photos shown may be indicative only and may show optional extras. While every effort has been made to ensure information on this website is both true and correct, Waimea Group assumes no responsibility or liability for any errors or omissions in the content of this site.

Additional information

Stock Number

1011

Ask one of our industry experts about your customised solution today.

Get In Touch