Alfagomma Boomer Hose
Description
Heavy duty corrugated industrial sewer vacuum hose
All hose sizes are inside diameter measurements except where otherwise stated.
Heavy duty corrugated industrial sewer vacuum hose
The Alfagomma® T704HA Series THE BOOMER™ Industrial Sewer Vacuum Hose is made with a 6.35mm thick red gum rubber tube for abrasion-resistance. The corrugated black conductive SBR/NR blend cover provides abrasion and ozone-resistance as well as increased hose flexibility. It is ideal for dry or wet abrasive materials and can be grounded.
Is priced per metre and in 30-metre coils.
Applications
- Material handling suction/discharge.
- Industrial vacuum equipment applications.
- Great hose for dry or wet abrasive materials.
- Popular hose for vacuum truck industry where a rugged and durable hose product is needed.
- Drill cutting suction hose in mobile drilling rigs.
Construction
- Tube - 1/4" thick red gum rubber tube for abrasion-resistance.
- Reinforcement - High tensile textile fabric with embedded steel helical wire.
- Cover - Corrugated black conductive SBR/NR blend cover for abrasion and ozone-resistance.
Key features
Abrasion Resistant Tube
1/4" gum rubber tube designed for wet or dry applications where severe abrasion is a factor. Provides for long hose service life.
Heavy Duty Construction
Thick tube and cover, high tensile strength fabric and durable steel helix wire designed for high pressure and vacuum application. All sizes rated to full vacuum, and PSI safety factor 3:1 (2"-8") and 2.5:1 (10").
Grounding Wire
Steel wire helps prevent the build-up of static electricity and to help keep material flowing smoothly. This product is designed to help dissipate statis electricity when the metal wire is properly connected to the ground through the fitting or other means.
“Cold-Flex” Materials
Hose remains flexible in sub-zero temperatures.
Specifications
- Service temperature range: -40°F (-40°C) to +212°F (+100°C)
- Inside diameter: 6 inches / 152mm
- Outside diameter: 7.04 inches / 174mm
- Maximum recommended WP (psi): 150 / 10 bar
- Vacuum HG: 30 inches
- Minimum bend radius (inches at 20°C/68°F) 24 degrees
PLEASE NOTE: Photos shown may be indicative only and may show optional extras. While every effort has been made to ensure information on this website is both true and correct, Waimea Group assumes no responsibility or liability for any errors or omissions in the content of this site.
Additional information
| Size | 1.5", 1", 2", 3", 3/4" |
|---|
